Getting Started on Heroku with PHP

Introduction

This tutorial will have you deploying a PHP app in minutes.

Hang on for a few more minutes to learn how it all works, so you can make the most out of Heroku.

The tutorial assumes that you have:

• A verified Heroku Account
• PHP installed locally.
• Composer installed locally.
• An Eco dynos plan subscription (recommended)

Set up

In this step you’ll install the Heroku Command Line Interface (CLI). You use the CLI to manage and scale your applications, provision add-ons, view your application logs, and run your application locally.

Download and run the installer for your platform:

Additional installation methods for various operating systems can be found in the Heroku CLI article.

Once installed, you can use the heroku command from your command shell.

Use the heroku login command to log in to the Heroku CLI:

$ heroku login
heroku: Press any key to open up the browser to login or q to exit
 ›   Warning: If browser does not open, visit
 ›   https://cli-auth.heroku.com/auth/browser/***
heroku: Waiting for login...
Logging in... done
Logged in as me@example.com

This command opens your web browser to the Heroku login page. If your browser is already logged in to Heroku, simply click the Log in button displayed on the page.

This authentication is required for both the heroku and git commands to work correctly.

Before you continue, check that you have the prerequisites installed properly. Type each command below and make sure it displays the version you have installed. (Your versions might be different from the example.) If no version is returned, go back to the introduction of this tutorial and install the prerequisites.

All of the following local setup will be required to complete the “Declare app dependencies” and subsequent steps.

This tutorial will work if you have PHP installed - check that it’s there:

$ php -v
PHP 8.2.3 (cli) (built: Feb 15 2023 00:18:01) (NTS)
Copyright (c) The PHP Group
Zend Engine v4.2.3, Copyright (c) Zend Technologies

Now check that you have composer installed. If not, install it and test again:

$ composer -V
Composer version 2.5.1 2022-12-22 15:33:54

Now check that you have git installed. If not, install it and test again.

$ git --version
git version 2.39.1

Prepare the app

In this step, you will prepare a sample application that’s ready to be deployed to Heroku.

To clone the sample application so that you have a local version of the code that you can then deploy to Heroku, execute the following commands in your local command shell or terminal:

$ git clone https://github.com/heroku/php-getting-started.git
$ cd php-getting-started

You now have a functioning Git repository that contains a simple application as well as a composer.json file. Make sure you’ve installed Composer. Heroku uses Composer for dependency management in PHP projects, and the composer.json file indicates to Heroku that your application is written in PHP.

Deploy the app

In this step you will deploy the app to Heroku.

 

Create an app on Heroku, which prepares Heroku to receive your source code:

$ heroku create
Creating app... done, ⬢ sharp-rain-871
https://sharp-rain-871.herokuapp.com/ | https://git.heroku.com/sharp-rain-871.git

When you create an app, a Git remote (called heroku) is also created and associated with your local Git repository.

Heroku generates a random name (in this case sharp-rain-871) for your app, or you can pass a parameter to specify your own app name.

Now deploy your code:

$ git push heroku main
…
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Building on the Heroku-22 stack
remote: -----> Determining which buildpack to use for this app
remote: -----> PHP app detected
remote: -----> Bootstrapping...
remote: -----> Preparing platform package installation...
remote:        NOTICE: No runtime required in composer.json; requirements
remote:        from dependencies in composer.lock will be used for selection
remote: -----> Installing platform packages...
remote:        - php (8.2.3)
remote:        - apache (2.4.55)
remote:        - composer (2.5.3)
remote:        - nginx (1.22.1)
remote: -----> Installing dependencies...
remote:        Composer version 2.5.3 2023-02-10 13:23:52
remote:        Installing dependencies from lock file
remote:        Verifying lock file contents can be installed on current platform.
remote:        Package operations: 22 installs, 0 updates, 0 removals
remote:          - Downloading laravel/serializable-closure (v1.3.0)
remote:          - Downloading psr/log (3.0.0)
remote:          - Downloading monolog/monolog (3.3.1)
…
remote:          - Installing slim/twig-view (3.3.0): Extracting archive
remote:        Generating optimized autoload files
remote: -----> Preparing runtime environment...
remote: -----> Checking for additional extensions to install...
remote: -----> Discovering process types
remote:        Procfile declares types -> web
remote:
remote: -----> Compressing...
remote:        Done: 16.4M
remote: -----> Launching...
remote:        Released v3
remote:        https://sharp-rain-871.herokuapp.com/ deployed to Heroku
remote:
remote: Verifying deploy... done.
To https://git.heroku.com/sharp-rain-871.git
 * [new branch]      main -> main

Now visit the app at the URL generated by its app name. As a handy shortcut, you can open the website as follows:

$ heroku open

View logs

Heroku treats logs as streams of time-ordered events aggregated from the output streams of all your app and Heroku components, providing a single channel for all of the events.

View information about your running app using one of the logging commands, heroku logs --tail:

$ heroku logs --tail
2023-02-24T13:53:07.000000+00:00 app[api]: Build succeeded
2023-02-24T13:53:07.006183+00:00 app[api]: Scaled to web@1:Eco by user me@example.com
2023-02-24T13:53:08.219766+00:00 heroku[web.1]: Starting process with command `heroku-php-apache2 web/`
…
2023-02-24T13:53:12.981285+00:00 heroku[web.1]: State changed from starting to up

Refresh your application in the browser a few times, and you’ll see log messages generated by not only the app’s web server (Apache HTTPD) and Heroku’s router, but also by the app itself:

2023-02-24T13:59:47.313998+00:00 app[web.1]: [2023-02-24T13:59:47.313572+00:00] default.DEBUG: logging output. [] []
2023-02-24T13:59:47.316389+00:00 app[web.1]: 10.1.46.63 - - [24/Feb/2023:13:59:47 +0000] "GET / HTTP/1.1" 200 6802 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/16.3 Safari/605.1.15
2023-02-24T13:59:47.316226+00:00 heroku[router]: at=info method=GET path="/" host=warm-depths-57683.herokuapp.com request_id=95c5fbfd-5aed-4d06-a7e0-ad64d820c9e3 fwd="85.222.134.4" dyno=web.1 connect=0ms service=6ms status=200 bytes=6974 protocol=https

Logging something from your app is simply a matter of directing output to stdout or stderr - Heroku does the work of aggregating this across all the app and system components. View the web/index.php file to see how the Monolog service is configured to write its output to stderr, which is put to use a few lines later, when the message “logging output.” gets logged.

Press Control+C to stop streaming the logs.

Define a Procfile

Use a Procfile, a text file in the root directory of your application, to explicitly declare what command should be executed to start your app.

The Procfile in the example app you deployed looks like this:

web: heroku-php-apache2 web/

This declares a single process type, web, and the command needed to run it. The name web: is important here. It declares that this process type will be attached to the HTTP routing stack of Heroku, and receive web traffic when deployed.

Procfiles can contain additional process types. For example, you might declare one for a background worker process that processes items off of a job queue.

Scale the app

Right now, your app is running on a single web dyno. Think of a dyno as a lightweight container that runs the command specified in the Procfile.

You can check how many dynos are running using the ps command:

$ heroku ps
=== web (Eco): heroku-php-apache2 web/ (1)
web.1: up 2023/02/24 14:53:12 +0100 (~ 21m ago)

By default, your app is deployed on an eco dyno. Eco dynos will sleep after a half hour of inactivity (if they don’t receive any traffic). This causes a delay of a few seconds for the first request upon waking. Subsequent requests will perform normally. Eco dynos also consume from a monthly, account-level quota of eco dyno hours - as long as the quota is not exhausted, all eco apps can continue to run.

To avoid dyno sleeping, you can upgrade to a Basic or Professional dyno type as described in the Dyno Types article. For example, if you migrate your app to a professional dyno, you can easily scale it by running a command telling Heroku to execute a specific number of dynos, each running your web process type.

Scaling an application on Heroku is equivalent to changing the number of dynos that are running. Scale the number of web dynos to zero:

$ heroku ps:scale web=0

Access the app again by hitting refresh on the web tab, or heroku open to open it in a web tab. You will get an error message because you no longer have any web dynos available to serve requests.

Scale it up again:

$ heroku ps:scale web=1

Declare app dependencies

Heroku recognizes an app as PHP by the existence of a composer.json file in the root directory.

The demo app you deployed already has a composer.json, and it looks something like this:

{
  "require" : {
    "php-di/php-di": "^7.0",
    "slim/slim": "^4.0",
    "php-di/slim-bridge": "^3.1.0",
    "slim/psr7": "^1.3.0",
    "monolog/monolog": "^3.0",
    "twig/twig": "^3.0",
    "slim/twig-view": "^3.0"
  },
  "require-dev": {
    "heroku/heroku-buildpack-php": "*"
  }
}

The composer.json file specifies the dependencies that should be installed with your application. When an app is deployed, Heroku reads this file and installs the appropriate dependencies into the vendor directory.

Your PHP app can then make use of the dependencies after a simple require:

require('../vendor/autoload.php');

Run the following command locally on your computer to install the dependencies, preparing your system for using the app locally:

$ composer install
Installing dependencies from lock file (including require-dev)
Verifying lock file contents can be installed on current platform.
Package operations: 23 installs, 0 updates, 0 removals
  - Installing heroku/heroku-buildpack-php (v231): Extracting archive
  - Installing laravel/serializable-closure (v1.3.0): Extracting archive
  - Installing psr/log (3.0.0): Extracting archive
  - Installing monolog/monolog (3.3.1): Extracting archive
…

You should always check composer.json and composer.lock into your Git repo. The vendor directory should be included in your .gitignore file.

Push local changes

In this step you’ll learn how to propagate a local change to the application through to Heroku. As an example, you’ll modify the application to add an additional dependency (the Cowsay library) and the code to use it.

First, use Composer to require the new dependency:

$ composer require alrik11es/cowsayphp

This will also change composer.json. If you introduced the dependency by modifying the composer.json file yourself, be sure to update the dependencies by running:

$ composer update

Now modify web/index.php to use this library. Since our app uses PHP-DI for Dependency Injection, you must first add another entry to the container near the top of the file, so that PHP-DI knows how to instantiate a Cowsay animal instance:

// Add Cowsay to Container
$container->set(\Cowsayphp\AnimalInterface::class, function() {
  return \Cowsayphp\Farm::create(\Cowsayphp\Farm\Cow::class);
});

Now you can add a new route near the bottom of web/index.php, and its function’s AnimalInterface type hint will cause PHP-DI to automatically inject an instance of class Cow:

$app->get('/coolbeans', function(Request $request, Response $response, LoggerInterface $logger, \Cowsayphp\AnimalInterface $animal) {
  $logger->debug('letting the Cowsay library write something cool.');
  $response->getBody()->write("<pre>".$animal->say("Cool beans")."</pre>");
  return $response;
});

When that route is visited, it will render a beautiful ASCII cow that proclaims “Cool beans”!

Now deploy. Almost every deploy to Heroku follows this same pattern.

First, add the modified files to your local Git repository:

$ git add composer.json composer.lock web/index.php

Then commit the changes to the repository:

$ git commit -m "cowsay for /coolbeans"

Now deploy, just as you did previously:

$ git push heroku main

Finally, check that everything is working by quickly opening the /coolbeans route in your browser:

$ heroku open coolbeans

Provision add-ons

Add-ons are third-party cloud services that provide out-of-the-box additional services for your application, from persistence through logging to monitoring and more.

By default, Heroku stores 1500 lines of logs from your application. However, it makes the full log stream available as a service - and several add-on providers have written logging services that provide things such as log persistence, search, and email and SMS alerts.

In this step you will provision one of these logging add-ons, Papertrail.

Provision the papertrail logging add-on:

$ heroku addons:create papertrail
Creating papertrail on ⬢ sharp-rain-871... free
…
Created papertrail-reticulated-81649 as PAPERTRAIL_API_TOKEN
Use heroku addons:docs papertrail to view documentation

The add-on is now deployed and configured for your application. You can list add-ons for your app like so:

$ heroku addons

To see this particular add-on in action, visit your application’s Heroku URL a few times. Each visit will generate more log messages, which should now get routed to the papertrail add-on. Visit the papertrail console to see the log messages:

$ heroku addons:open papertrail

Your browser will open up a Papertrail web console, showing the latest log events. The interface lets you search and set up alerts:

Start an interactive shell

You can run a command, typically scripts and applications that are part of your app, in a one-off dyno using the heroku run command. It can also be used to launch an interactive PHP shell attached to your local terminal for experimenting in your app’s environment:

$ heroku run "php -a"
Running php -a on ⬢ sharp-rain-871... up, run.8336 (Eco)
Interactive shell

php >

If you receive an error, Error connecting to process, then you may need to configure your firewall.

The PHP console has nothing loaded other than the PHP standard library. Enter a PHP expression such as an echo, and eventually quit the PHP shell by typing quit:

$ heroku run "php -a"
Running php -a on ⬢ sharp-rain-871... up, run.8336 (Eco)
Interactive shell

php > echo PHP_VERSION;
8.2.3
php > quit

To get a real feel for how dynos work, you can create another one-off dyno and run the bash command, which opens up a shell on that dyno. You can then execute commands there. Each dyno has its own ephemeral filespace, populated with your app and its dependencies - once the command completes (in this case, bash), the dyno is removed.

$ heroku run bash
Running bash on ⬢ sharp-rain-871... up, run.5134 (Eco)
~ $ ls
Procfile  README.md  app.json  composer.json  composer.lock  vendor  views  web
~ $ exit
exit

Don’t forget to type exit to exit the shell and terminate the dyno.

Define config vars

Heroku lets you externalise configuration - storing data such as encryption keys or external resource addresses in config vars.

At runtime, config vars are exposed as environment variables to the application which you can read using PHP’s getenv function. This way, your app source does not contain hard-coded credentials for databases, external API endpoints and so forth.

In addition to storing credentials such as database connection information, it’s also common practice to place configuration flags or values that control essential behavior of your app into config vars. An update to a config var will create a new release and change behavior of the app without requiring a new code deploy.

The Cowsay library supports other types of animals, and this example will use an environment variable to control which class is used.

Modify web/index.php so that the DI container uses an environment variable to determine which Cowsay animal class instance to return:

// Add Cowsay to Container
$container->set(\Cowsayphp\AnimalInterface::class, function() {
  $class = '\\Cowsayphp\\Farm\\'.(getenv("COWSAY_FARM_CLASS")?:'Cow');
  return \Cowsayphp\Farm::create($class);
});

The COWSAY_FARM_CLASS config var will now control which class to instantiate; if no such config var exists, it will default to Cow, as before.

Commit and deploy this change first:

$ git add web/index.php
$ git commit -m "make Cowsay animal controllable by env var COWSAY_FARM_CLASS"
$ git push heroku main

If you visit the /coolbeans URL again, the message will still be spoken by a cow, so it’s time to change the type of animal by setting the COWSAY_FARM_CLASS config var to a value other than “Cow”.

To set the config var on Heroku, execute the following (instead of “Dragon”, you could also use “Tux” or “Whale”):

$ heroku config:set COWSAY_FARM_CLASS=Dragon
Setting COWSAY_FARM_CLASS and restarting ⬢ sharp-rain-871... done, v6
COWSAY_FARM_CLASS: Dragon

A new release was created by this config var change, which you can again see in heroku logs:

$ heroku logs
…
2023-02-24T15:13:50.993624+00:00 app[api]: Set COWSAY_FARM_CLASS config vars by user me@example.com
2023-02-24T15:13:50.993624+00:00 app[api]: Release v6 created by user me@example.com
2023-02-24T15:13:51.274075+00:00 heroku[web.1]: Restarting
2023-02-24T15:13:51.290040+00:00 heroku[web.1]: State changed from up to starting
2023-02-24T15:13:52.800435+00:00 heroku[web.1]: Stopping all processes with SIGTERM
…
2023-02-24T15:13:53.295318+00:00 heroku[web.1]: Starting process with command `heroku-php-apache2 web/`
…
2023-02-24T15:13:55.179619+00:00 heroku[web.1]: State changed from starting to up

Refreshing /coolbeans in your browser will now render the “Cool beans” message using a different ASCII animal.

You can always list the config vars that are set on an app using heroku config:

$ heroku config
=== sharp-rain-871 Config Vars
COWSAY_FARM_CLASS:    Dragon
PAPERTRAIL_API_TOKEN: lq7…

Provision a database

The add-on marketplace has a large number of data stores, from Redis and MongoDB providers, to Postgres and MySQL. In this step, you add a Heroku Postgres Essential-0 database to your app.

Add the database:

$ heroku addons:create heroku-postgresql:essential-0
Creating heroku-postgresql:essential-0 on ⬢ sharp-rain-871... ~$0.007/hour (max $5/month)
Database should be available soon
postgresql-concentric-05005 is being created in the background. The app will restart when complete...
Use heroku addons:info postgresql-concentric-05005 to check creation progress
Use heroku addons:docs heroku-postgresql to view documentation

This created a database, and set a DATABASE_URL config var containing a URL with connection information (you can see its value by running heroku config).

To use the database, first modify web/index.php to instruct PHP-DI to construct a PHP PDO connection:

// Add Database connection to Container
$container->set(PDO::class, function() {
  $dburl = parse_url(getenv('DATABASE_URL') ?: throw new Exception('no DATABASE_URL'));
  return new PDO(sprintf(
    "pgsql:host=%s;port=%s;dbname=%s;user=%s;password=%s",
    $dburl['host'],
    $dburl['port'],
    ltrim($dburl['path'], '/'), // URL path is the DB name, must remove leading slash
    $dburl['user'],
    $dburl['pass'],
  ));
});

Note how this code retrieves the DATABASE_URL config var from the environment using getenv(), and extracts information on hostname, database and credentials from that config var using parse_url().

In the same file, add a new route handler for URL /db with code to query the database:

$app->get('/db', function(Request $request, Response $response, LoggerInterface $logger, Twig $twig, PDO $pdo) {
  $st = $pdo->prepare('SELECT name FROM test_table');
  $st->execute();
  $names = array();
  while($row = $st->fetch(PDO::FETCH_ASSOC)) {
    $logger->debug('Row ' . $row['name']);
    $names[] = $row;
  }
  return $twig->render($response, 'database.twig', [
    'names' => $names,
  ]);
});

This ensures that when you access your app using the /db route, it will return all rows in the test_table table (logging each row to heroku logs for debugging purposes), and render the results using a Twig template named database.twig.

Create this database.twig template file inside the app’s views/ directory:

{% extends "layout.html" %}

{% block content %}
<p>Got these rows from the database:</p>

<ul>
{% for n in names %}
  <li> {{ n.name }} </li>
{% else %}
  <li><em>No entries yet!</em></li>
{% endfor %}
</ul>

{% endblock %}

Deploy the app modifications to Heroku:

$ git add web/index.php views/database.twig
$ git commit -m "added database access"
$ git push heroku main

If you now point your browser to /db (or use heroku open db to access that URL), you will see an error saying test_table does not exist.

Assuming that you have Postgres installed locally, use the heroku pg:psql command to connect to the database you provisioned earlier, and create that table using the CREATE TABLE SQL command:

$ heroku pg:psql
--> Connecting to postgresql-concentric-05005
psql (14.6)
SSL connection (protocol: TLSv1.3, cipher: TLS_AES_256_GCM_SHA384, bits: 256, compression: off)
Type "help" for help.

=> CREATE TABLE test_table (id INTEGER, name TEXT);
CREATE TABLE

Now when you access your app’s /db route, you will see “No entries yet!”, because there are no records in the table yet.

Go back to the heroku pg:psql session you have open, and insert a few rows:

=> INSERT INTO test_table VALUES (1, 'hello database');
INSERT 0 1
=> INSERT INTO test_table VALUES (2, 'oh nice, this works!');
INSERT 0 1
=> QUIT

If you refresh the /db page in your browser, these records will now show up!

 

Next steps

You now know how to deploy an app, change its configuration, view logs, scale, and attach add-ons.

Here’s some recommended reading:

• Read How Heroku Works for a technical overview of the concepts you’ll encounter while writing, configuring, deploying and running applications.
• Read Deploying PHP Apps on Heroku to understand how to take an existing PHP app and deploy it to Heroku.
• Visit the PHP category to learn more about developing and deploying PHP applications.